1. Why would I want to hack windows?
2. Are there many restrictions that can be placed on me?
3. Where do these restrictions come from?
4. What is the registry?
5. Where is the registry?
6. Can I edit it myself?
7. I can't edit the registry. How do I get around this ?
8. I can't get to the registry files to delete them! What now?
9. I have the 'Run' command. What next?
10. The evil scum bags have nicked the 'Run' command! Now what?!?
11. So what's this magic shortcut trick then?
12. When I type in the directory in explorer, it returns "Access Denied". Why?
13. Okay, I've found the files..only I can't delete them! Windows says that are protected!
14. Right, I've sabotaged the files. What next?
15. My plans are being thwarted by this stupid registry checker! HELP!
16. The network is on the Internet but Cyber patrol won't let me access any hacking sites!
17. I can't access the disk drive or the CDROM yet I see the Admins doing it! How can I ?
18. When I try to access A: , the whole machine crashes on me! Why?
19. I MUST have floppy access! How do I get it?
20. Sneaking files onto a Network
21. Right, I've got the program. What now ?
22. How can I get back all those nice programs that they removed from my start menu?
23. How do I change this cursed background without using the display properties?
24. The 'Net Plug' trick
25. I still need DOS access to run the programs. How can I get it?
26. I've done that but I get "This has been disabled by your system Administrator
27. What the hell is poledit?
28. Okay, I've managed to get poledit onto the network. now what?
29. I think it worked but when I logged back onto the network, the old settings kicked in.

Well, okay stupid question but why would you want to hack windows when there are all those lovely servers to take on? The answer is so simple, it often eludes people altogether. How exactly are you going to take out the server if your workstation is so crippled, you can't even use the run command? Most hacking programs are DOS based. If your friendly Admin has removed MS-DOS access, you're in trouble. You won't be able to run all those nice programs you've collected.

What if they Admin has placed some really horrible backdrop on your machine. You have a great replacement only the display properties aren't available. How do you get round that? Well, that's what this tutorial is all about : Removing restrictions on the local machine so that you can get a shot at the servers or so you can run programs that you otherwise wouldn't be able to.

There are a surprising amount of things Admins can do to your computer to make it more restricted. To compromise of course, there are many ways to remove these annoying restrictions, one of which I worked out and removes all the restrictions although it temporarily screws up Internet Explorer's settings. Here is a small list :

Control Panel
Run command
Find command
Missing start menu programs
Fixed backdrop
No DOS access
Removed CDROM and floppy access

All of the above are a real pain in the ass. I'll go through removing these restrictions one by one.

Good question. There are two types of restriction, local and remote. The local restrictions are usually stored in the registry and are fairly easy to get round compared to the remote restrictions. These are restrictions placed on servers and are usually downloaded each time you login. They are VERY hard to get around and most are beyond the scope of this tutorial. However if I do show some of them, I'll point out that they are remote. Sometimes, the remote restrictions are enforced as local ones. This is handy to say the least.

The registry is a database that Windows uses to store all its information. You can consider it as a directory. Most programs and files are registered here, along with user and system settings. Driver versions and start up programs are also found in here. Without the registry, Windows would be in trouble.

The registry consists of two files, user.dat and system.dat . Both are stored in the windows directory. There are backups of both files called user.da0 and system.da0 . If the main two are destroyed, the system copies the new versions over to replace them.

The user.dat file contains user settings. All the different parts of a users settings make up a user profile. It is these profiles that contain the information regarding what restrictions should be enforced. Every user is stored here along with all their access rights. I'll show you how to fool the system into giving you full access the easy way later.

The system.dat file strangely enough contains information about the system. This includes settings for Internet Explorer and other pieces of software such as DirectX, MS Office etc etc.

Yes you can, using a program called regedit. It is automatically installed and unless your friendly Admin has removed your ability to edit it, you can use this program to set anything in the registry that you want.

NOTE : If you remove the system.dat file ( which you usually have to ) some programs may have problems finding their default settings or refuse to load.

Well the easiest way is to simply remove user.dat and system.dat . When you reset the computer and login, it will come up and tell you that it needs to reset to repair the registry. Ignore this message and use ctrl+alt+del to get it to close without selecting 'ok'. You will see that all the restrictions have been removed. Quickly go to 'Run' and type 'command' without the quotes. This will open a DOS window and for some reason stabilises the system. Windows had a nasty tendency to crash if I didn't open a DOS window for some reason. When you reset the computer, the old registry will kick in and the restrictions will be active again. This isn't so bad because it means you can get a machine back to normal with the minimum of fuss.

Don't panic yet! I'll show you two ways of getting to the files. Normally if the 'Run' command is missing, you're going to have trouble getting to the C:\windows directory which holds those files. Second, you'll find that they are write protected. In the next few sections I'll show you how to get round this.

Type "c:\windows\" without the quotes. This will take you to the directory that contains the registry. You will most likely get a message saying that altering the files could be dangerous and could stop windows or other programs from working. Ignore that and select continue or click the hyper link. It will now show you the files.

Now you panic........only joking! Most Admins do take out the run command as standard. It stops normal people from going where they shouldn't be. However, we can out smart them here by using the shortcut trick. This trick will get us whatever we need and is just as powerful as the run command, except it is slightly more inconvenient.

This trick is essential to a hackers toolkit. In Windows, you can create a shortcut to just about anything from a folder to a program or even a website! We can use this to our advantage. It also gets round the annoying "Access Denied" messages that explorer likes to give. Right click on the desktop, select new -> shortcut. When it asks what you want to make the shortcut to, type in "c:\windows\" without the quotes and press enter. Hit enter twice more and you will find a nice shortcut on your desktop. Click this twice and it will dump you in the Windows directory. Nice eh?

This means that the Admin has told explorer not to accept any requests to that folder, program or website. However for some reason explorer will let you straight through if you make a shortcut to that folder. Security is tight eh?

When windows says protected, it means write protected. This is when you can't write or alter a file. This is done for safety reasons. No one wants to accidentally delete the registry. However because we're evil we want to and Windows is stopping us. Don't worry, the protection is lame. Right click on the file and hit properties. Once in, untick the little box next to write protected and click apply then okay. Now try deleting the file. You should find that it goes without any hassle. This works with both registry files.

To prevent Windows catching on, just turn off the computer and switch it on again. If it starts up and the registry fixing program starts, you'll have to repeat the procedure. Sometimes it gets you, some times it doesn't. If it keeps coming up, see the next section.

This nasty little program kept catching me out. It is called regcheck and is usually found in the windows or windows\system directory. It is called from an ini file called regcheck.ini or regchck.ini . The name seems to vary from system to system though I can't see any reason why it should. You can alter the .ini file and remove the checking program. The script will complete and still the registry won't have been restored!! Tee hee!

Cyber patrol is a royal pain in the ass! However, it is very easy to remove. Press ctrl+alt+del to bring up the task list. Select Cyber Patrol and press enter. Cyber Patrol will now bring up a window asking for a password. Damn, we've been beaten! Not so, press ctrl+alt+del again. This time because Cyber Patrol has ALREADY answered windows, it won't access again. Thus Windows thoughtfully lets us close the program. Bye bye stupid restrictions!

This can be quite annoying. You have lots of stuff on disk or CD but you just can't access them. Why? Because some sod has removed their icons from 'My Computer'. *Sigh* I guess its no go then right? Wrong! Although you can't see the drives, they are still there. Load up ole faithful Internet Explorer and type "D:\" without the quotes and press Enter. It should display a list of the files on the CD. If it comes up with "Access Denied" or " Permission Denied" then simply make a shortcut to it. That way, you will see all the files.

This happens when the floppy drive has been disabled in the BIOS ( Basic Input Output System). When you try to access it, Windows will hang and force you to reboot. There is a nice easy way of testing if the drive is open before you crash your machine. When you log in or out, check the light on the drive. If it flashes, the drive is available even if you can't see it in the drive list. If it doesn't flash, the drive has been disabled.

The only way to get disk access is to enable the floppy drive in BIOS. This is almost ALWAYS passworded ( if not you're really lucky ). You will need a BIOS cracker and there are loads on the Internet. Check what BIOS the machine has when it boots up ( Award, AmiBIOS etc etc). Get a program for that. Obviously you will somehow need to get it on the Network and there is a cunning way to do that to!

This trick is so simple and yet so effective. Create a document that you could pass off as school work or something. Make sure it has an image file in it. Drag and drop the program file into your document and then place the Image file over it. Save as a .doc file and put it on a disk. Ask your friendly Admin to copy the file for you. Most will just copy it and those that check will just see a document with a piccy. They won't see your program. To get the program back, you need to open the document on your workstation. Drag the program back out and put it on your desktop. This trick works with any file of any type.

Run the program. It should give you a password. Write this down and reset the machine. As the machine checks its memory press the 'Del' button. It will then take you into the BIOS where it will prompt for the password. Enter the password that you got from the program. It should let you in. Go into the Basic options and look for floppy drive. Go to the first one. It probably says "Not Installed". Change it so it says "3 1/2 inch floppy". Quit the BIOS and save changes. When it boots up, the floppy drive will be active. Do the reverse to disable it again to stop Admins finding you and changing the password.

This is also quite easy. There is a program called groupconv.exe . By running this, you'll restore the default star menu along with all the usual programs and accessories. Useful if the Admin has removed some program that you prefer or want to use like Paint brush. You'll need paint to pull off the next trick.

Not so useful perhaps but nice to have none the less. No one likes the default backgrounds but Admins tend to remove the ability to change them which is rather upsetting. To pull this off, you need access to paint. Normally this isn't removed. Open your bitmap of choice into paint. From the 'File' menu, select "Set as background". This will set your bitmap as the background. Normally this won't stay the same and will change back next time you login. Still, you get a decent background for the duration of your session.

This is a nice easy way of getting Admin rights. I've taken this from my other tutorial and pasted it here because I don't want to have to type it out again. It is a very useful technique which is why I'm duplicating it here.

This is an attack that I worked out myself before I was given Admin status. It always works and I've yet to see it fail. Make sure you are at a windows 95 or 98 machine. I doubt NT would be fooled by this trick but I don't have any NT machines so I can't test it for you.

Note : Most Admins, believe that they are the most knowledgeable about their system. Many also believe that no one else knows much about computers. In other words, for whatever reasons, they are not too concerned about us i.e. the idiots attacking their servers. Why? Because we aren't good enough. So why waste valuable time configuring security that won't be needed eh? I think I've made my point. They don't see us as a threat. You don't consider a house spider a threat so you don't go round putting up netting to keep them out. Why? You can't be bothered. The same rule applies here. Even if you are a computer genius, play it dumb. Admins like to lecture the uninitiated and would love to appear smarter than you. This is the way you want it. The Admins will think you're a nice guy or gal, totally harmless. This sometimes gives you more leverage because they like you, they'll be willing to help you. They also won't expect you to launch a huge assault on their servers either However sometimes there are some smart people out there who will notice your talents and pull you over to their side. This isn't a bad place to be and can be advantageous later.

First of all, login as yourself. Crash your computer and reset it . Walk over to your favourite admin (the one that hates you most is the best choice ) and apologise for being an idiot but the computer won't let you login and could s/he please come and take a look for you. Mumbling and grumbling they'll come over. The best way to test if it is the machine is for them to login. Of course, they'll log in as an admin or equivalent. They'll check your account and see that your account is fine. They'll tell you to log onto another machine and your account will be okay. They'll now log off and walk off in disgust thinking you are a computer moron. Not so my friend, we've just done them good and proper!

Turn off the computer and pull out the network lead. Turn it back on again. The computer will detect that you aren't on a network and will dump you at a desktop with restrictions of the last user. If this user is the admin then chances are that he or she will have full access to everything including DOS and drive access. Perfect for installing all those really kewl programs you have on a disk in your pocket......

But you aren't on the network now. That's no fun is it? Shove the lead back in and try to access a network drive. This is the bit where you hope the Admins are sloppy or not computer geniuses. Windows by default caches ALL passwords so unless the Admins have told it not to ( a key deep in the registry) then windows will have a nice copy of their password. Go into 'My Computer' and click on a drive. Whoop with glee as Netware logs you in as an Admin. Why does this happen? Well windows still holds the username and password last used to access the drive. You are logged into windows as Admin and windows knows what credentials you last gave to the server. So it supplies them for you. Likewise because you are now authenticated you know have full access to the NDS tree. Not only can you read but you can no write, modify delete etc etc. Much more fun!

Now, this is the bit where you have to be sneaky. You have to make a new account for yourself or upgrade your old one. There are pros and cons to each of your choices. If you alter your existing account and they check it for some reason ( maybe you got locked out? ) they'll notice you have admin rights and shoot you. If you make a new user, it might get found quicker but there is no way to point to you ( it was created by user admin after all tee hee ). The choice is yours. You can always do both.

Not all Admins actually remove the ability to run DOS programs, simply because they are needed. It is likely though that the shortcuts and the run command will have been removed. Also I doubt you will be able to shutdown into MS-DOS mode. So how do you call up the window?

Well, we can use our usual shortcut trick. The program that opens the DOS windows is called "command.exe" . To run the program, simply make a shortcut to "command" without the quotes. Double clicking on the shortcut will pull up the MS-DOS prompt.

If you get this, your Admin has locked out the ability for your user to run DOS programs. Windows is suprisingly tight on DOS access. There is only ONE way that I currently know of ( I'm always searching for new ones though) to bypass this whilst logged in as yourself. To do this, you need a program called "poledit.exe".

Poledit ( short for policy editor ) is the program used to alter user settings on any given computer. This program edits the user.dat file that we saw earlier. It might have occured to some Admins to block access but I have yet to see it done. Normally registry editing is barred but that seems to be only when using regedit.

Poledit is NOT installed by default. You will find it on the Windows 98 CD in the resource kit folder. The file itself isn't very big and it doesn't need any support files. You can sneak it onto the network by hiding it in a Word file. If you have CDROM access, you could just load it in, or burn the program to CD.

Poledit controls ALL the access rights such as control panel access, display properties, find and run commands, DOS access, shutting down to MSDOS mode etc etc. This tool can give them all back to you!

Right, run the program. It will bring up a list of users and their policies. There will probably be two policies stored there ( at least). One will be called Admin or similar and the other default. You will be user default. Now, alter the settings to whatever you want and save them. Quit the program and you should find that your access has been increased!

This is a pain because it means your settings are stored on the server too. When it logs in, it activates the settings you updated and then overlays the new ones from the server. Annoying huh? Well there isn't all that much you can do about it apart from use the Net Plug trick.

How does it help us here? Well, turn off the computer, unplug the network lead and turn it back on. It will automatically log you in as the last user, i.e yourself. However because there is no server, it will pull its restrictions from the local file ( which we edited of course). Plug the network lead back into the computer and try to access the drives. Even if it asks you to login again ( to access the network ), Windows isn't clever enough to pull off the updated policy files. You're home free!!

written MiggyX <miggyx@amicoders.demon.co.uk>